Wear Resistant TCI Rock Roller Bits For The toughest Drilling Application
Click here for catalogueTCI DRILL BIT.pdf
Hard to Very-Hard Formation
Application : For use in moderately abrasive consolidated formations with compressive strength ranging between 140 – 485 Mpa such as hard limestone, quartzite, granodiorite, and medium grade metamorphic formations
Cutting structure: These bits are characterized by closely spaced conical or spherical inserts with medium to low projection. This configuration promotes good penetration rates in hard, consolidated and very abrasive formations. Smaller carbide inserts are provided on the gage and inner rows or hard metal is deposited in the nose area to contain shell erosion and improve performance.
- Compression Strength: 60,000 – 100,000 psi
- Drilling Speeds: 50 – 90 rpm
- Jet Circulation: All sizes
- Weight on Bit (WOB): 4,000 – 7,500 lbs/in of bit diamete
How to read an IADC Code properlyHow To Read IADC 1.pdf
Advantage:
1. Strictly select the material to ensure the reliable quality. Bad steel and tungsten carbide inserts won't be used.
2. Strictly act according to the ISO9001 standard, and control by full-scale inspection.
3. Sales and support people are highly trained in the latest rock drilling technology and can offer you expert advice on what products will best fit a specific end use application.
INTERRELATIONSHIP BETWEEN INSERTS REQUIREMENTS AND THE FORMATION
|
Formation
Characteristics
|
Insert Spacing |
Insert
Properties
|
Penetration and Cuttings Production |
Cleaning Flow Rate Requirement |
| Soft |
Wide |
Long and sharp |
High |
High |
| Medium |
Relatively wide |
Shorter and stubbier |
Relatively high |
Relatively high |
| Hard |
Close |
Short and rounded |
Relatively low |
Relatively lower |
Application
Tricone drill bit is one of the main tools for blast hole and well drilling, mainly used for large-scale open-pit mining, such as open-pit coal mines, iron mines, copper mines and molybdenum mines, also the non-metallic mines. With the increasing in variety of type, it’s also widely used in quarrying, foundation clearing, hydrogeological drilling, coring, tunneling in railway transportation department and shaft drilling in underground mines. The rock breakage by the tricone bit which used in mine is working with both the impact of teeth and the shear caused by slippage of the teeth, which bring high rock breaking efficiency and the low operation cost.
Main Products We Provide
We mainly provide Tricone Bits(TCI Drill Bits) for open pit mining.
a). Type: Tungsten Carbide Insert (TCI)
b). Formation Application: Soft to Hard Formation
c). Size Available: 7 7/8''~26''
d). Popular IADC Code: IADC545,645,725,735,745,825,835
Don’t see the bit you are looking for? Give us a call, we can customize any bit to fit your unique circumstances.
The above represents commonly available sizes and types, we do produce other sizes and types of rock drill bits which do not appear . Please contact us for more information.
Product Tags:
|
|
Antiwear TCI Rock Roller Bits Shirttail Protected For The toughest Drilling Application Images
|
